We Installed Two SG500 Switches in Native stacking mode
We are facing problem with TCAM
In SG500 Maximum TCAM Utilization is 2000 (2K)
IPv4 Routing Resources
i changed the Maximum Entries up to 1925
But in our case
Count TCAM Entries
Neighbors (1 TCAM entry per neighbor): 1019 1019
Interfaces (2 TCAM entries per interface): 18 36
Routes (1 TCAM entry per route): 1 1
Neighbors entry not increasing from 1019.
Total TCAM stopped at 1056...
How many Maximum Neighbors TCAM entries supports SG500 Switch?