WLC Tx Power Level Assignment

bill-anderson · ‎03-27-2017

We have a WLC running 8.2.121.0 that has Wireless 802.11b > RRM > Tx Power Control(TPC)) > Minimum Power Level Assignment set to 10 dBm. On a 2802 AP, that should be about power level 5. The WLC Power Level Assignment Method is automatic. The APs are set to use the global power and channel configuration. However, the APs lower their power to 6 or 7, which is below the minumum. Any ideas?

Leo Laohoo · ‎03-27-2017

I wouldn't recommend using firmware version 8.2.121.0 with 2800/3800 APs. Try 8.2.151.0 as it's more stable and mature.

bill-anderson · ‎03-27-2017

I'll try that when we get these APs on their own controller. Thanks for the fast response.