03-29-2017 12:37 AM - edited 03-08-2019 09:57 AM
Hi
ssh enabled, but telnet service still on when doing "telnet 10.4.255.1 23" . Not sure why it is so, I presume it is because of line vty 5 15 below ? Need some advice on this. Thanks.
------------------------------
line con 0
exec-timeout 5 0
login
line vty 0 4
access-class 120 in
exec-timeout 5 0
login local
transport input ssh
line vty 5 15
no login
no exec
----------------------
Thanks in advance.
Solved! Go to Solution.
03-29-2017 01:12 AM
Try transport input ssh on your 5 through 15 vty lines.
03-29-2017 01:12 AM
Try transport input ssh on your 5 through 15 vty lines.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide