Hello community,
I've problems to boot the switch with the running config.
System Operational Mode: L3 Mode
System Description: SG300-20 20-Port Gigabit Managed Switch
Firmware Version (Active Image): 1.4.7.6
Boot Version: 1.3.5.06
Locale: en-US
Language Version: 1.4.5.02
All actions are made in the web-ui.
Copy Running configuration to Startup configuration
Copy/Save Configuration
Status: Copy finished
No output of the bytes transferred shown.
When i reboot the the Switch, i have false Port VLAN Membership setting.
The Save icon is now blinking. This means the running config differs to the startup config.
It seems that the Switch is booted with a wrong config.
