mls qos trust dscp supported syntax

vantipov · ‎04-24-2017

I need to apply "mls qos trust dscp" on my new cat3850s and cat4510s. But the syntax must have changed because I get no mls if I do #m? at the global config or per interface. I am running 3.7.1 on both 3850s and 4510s with LANBASE license. What is the new command for the global and per interface for mls qos?

Georg Pauwen · ‎04-24-2017

Hello,

MLS has evolved into MQC, have a look at the document below:

3750 MLS to 3850 MQC Conversion of QoS Configuration

http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3850-series-switches/118629-technote-qos-00.html

vantipov · ‎04-24-2017

Georg, that's a good article, thanks.