Solved: ASR9K POwer Modules V2

dlarade · ‎04-28-2017

Would anyone know where to find the Wiring Schematic on how these PEM Power Modules are internally wired? Want to know if PS0 M0 A side

is a common point as PS0 M0 B Side.

Thanks

Dave

Aleksandar Vidakovic · ‎04-29-2017

hi Dave,

I suppose this is the information that you are ultimately looking for:

DC Power Version 2

DC V2 PS delivers up to 2.1 kW to the system
Power tray holds up to 4 DC V2 power supplies
Dual input feed
Feed redundancy is built into the PEM – logical “OR” between feeds. If one feed fails, PEM still delivers 2.1 kW

AC Power Version 2

Aleksandar Vidakovic · ‎04-29-2017

hi Dave,

I suppose this is the information that you are ultimately looking for:

DC Power Version 2

DC V2 PS delivers up to 2.1 kW to the system
Power tray holds up to 4 DC V2 power supplies
Dual input feed
Feed redundancy is built into the PEM – logical “OR” between feeds. If one feed fails, PEM still delivers 2.1 kW

AC Power Version 2

dlarade · ‎05-01-2017

So in the DC Power version 2.

If the Power module say in PS0 "M0" is fed an A feed from a DC source and also fed a B feed, Are they independent of each other until one feed fails?

so in essences you have only the A feed "Active" until it fails then B Feed kicks in?

Thanks

Dave