Questions about AnyConnect with Cisco Jabber

Answered Question
May 19th, 2017
User Badges:

Dear All .

Thank you  for your continues help .

As of now i have this question in my mind that i have since a long time .

Suppose i have the following scenario :

  • ASA5512 in the office with Cisco AnyConnect VPN Clients with ASDM.
  • BE6000S(CUCM 11.5) with Cisco Jabber client .

We need to allow Jabber on Iphone devices to be able to connect from internet .

Is it possible without any other extra devices (like VCS expressway E&C).

Please reply since the question i still didnt find a clear answered even after reading the books.

Thank  you

Correct Answer by Jaime Valencia about 1 week 16 hours ago

Not a VPN guy, but if you can make a tunnel from your device to your internal network, and you can reach the voice servers, you should be able to connect.

Make sure to have the proper routing so the devices can register to the UC servers, and so that they can send the RTP to the devices they call.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jaime Valencia Fri, 05/19/2017 - 08:09
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

Not a VPN guy, but if you can make a tunnel from your device to your internal network, and you can reach the voice servers, you should be able to connect.

Make sure to have the proper routing so the devices can register to the UC servers, and so that they can send the RTP to the devices they call.

mabuzaid1 Fri, 05/19/2017 - 15:58
User Badges:

Thank you Jaime .

I didnt see (at least me ) much of Cisco documentation talks about it as a solution for small business application .

However as you said registering to the cucm require an access to the network and the CUCM which this VPN anyconnect offers .

I will try it after sometime and will let you know .


Regards

Mansour

Actions

This Discussion