06-15-2017 12:57 PM - edited 03-08-2019 10:59 AM
We have some Nexus 3000 in our data centers and need to enable jumbo frames for VMware and storage. Looking at the documentation, there is no way to apply jumbo frame on a per port basis. I have created a policy map for jumbo frames.
How do I apply it to a VLAN or possibly the switch.
policy-map type network-qos jumbo
class type network-qos class-default
match qos-group 0
mtu 9216
Solved! Go to Solution.
06-15-2017 06:20 PM
To apply to the switch use this command:
system qos
service-policy type network-qos jumbo
see link for more info:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/qos/503_u1_1/b_Cisco_nexus3000_qos_config_gd_503_u1_1/b_Cisco_nexus3000_qos_config_gd_503_u1_1_chapter_010.html
HTH
06-15-2017 06:20 PM
To apply to the switch use this command:
system qos
service-policy type network-qos jumbo
see link for more info:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/qos/503_u1_1/b_Cisco_nexus3000_qos_config_gd_503_u1_1/b_Cisco_nexus3000_qos_config_gd_503_u1_1_chapter_010.html
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide