Hi
topic: configuring snmp traps on asa managed by firepower management FS2000.
We recently configured /enabled snmp traps using the Cisco FMC gui. we have got a couple of asa (thread defence devices) managed by FMC.
-How can i do a test on the ASA and validate the traps are coming over to our snmp server (configured via fmc ). Any test commands exist?
-What commands other than show snmp statistics are there to see traps. i could see x number of Traps PDUs as outcome of above commands- does that mean traps are working?
-What debugging if any can be used specific to traps.
-Where can i see the historic traps generated
-Can we tell cisco to write the traps to a local file also along with sendning to the snmp server.
second question
the same FMC manages a few more ASAs at a different geographic location where we want traps to be sent a different snmp server
-How can we point those ASAs to a second snmp trap destination.
NB: we configure Trap from the Platform Settings under Devices from the Cisco Firepower management center console.