Need urgent help on ip device tracking max command

Unanswered Question
Aug 12th, 2017
User Badges:

Hi ,


I need urgent help, I have installed 30  3650 devices in client location

I want to run ip device tracking max 0 command on cisco 3650 switches but I think its not supported , if any one can suggest if any alternate for this command which we can run on 3650 Switches

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Philip D'Ath Sat, 08/12/2017 - 15:24
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 WAN, LAN, VPN

Are you wanting to disable device tracking?

neeraj.a.verma Sun, 08/13/2017 - 00:07
User Badges:

Hi Phlip ,


This command also not supporting on 3650-FQM  at interface level - software verion 16.3.3, please suggest

Philip D'Ath Sun, 08/13/2017 - 12:18
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 WAN, LAN, VPN

I would not run 16.x code unless you really have to.  It is very new.  I would stick to the more mature 3.7 or 3.6 train.

Leo Laohoo Sun, 08/13/2017 - 15:36
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

I would not run 16.x code unless you really have to.

He doesn't have a choice, Philip.  FQM requires a minimum of 16.3.1.  

Bad luck, I guess. 

Philip D'Ath Sat, 08/12/2017 - 15:25
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 WAN, LAN, VPN

If you want to disable it I think the command is something like "nmsp attachment suppress".  I think this might have to be applied at the interface level.

Leo Laohoo Sun, 08/13/2017 - 15:34
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

IP Device Tracking needs to be enabled globally and at the interface level.  

The minimum lines of configuration needed are the following: 

  1. Globaly:  ip device tracking
  2. Interface-level:  ip device tracking max <ANY NUMBER HIGHER THAN 0>

To disable IP Device Tracking, use the global command "no ip device tracking" and remove the interface-level command.

Actions

This Discussion