Need urgent help on ip device tracking max command

neeraj.a.verma · ‎08-12-2017

Hi ,

I need urgent help, I have installed 30 3650 devices in client location

I want to run ip device tracking max 0 command on cisco 3650 switches but I think its not supported , if any one can suggest if any alternate for this command which we can run on 3650 Switches

Philip D'Ath · ‎08-12-2017

Are you wanting to disable device tracking?

neeraj.a.verma · ‎08-12-2017

Yes I want to disable ,

Thanks a lot for your help

neeraj.a.verma · ‎08-13-2017

Hi Phlip ,

This command also not supporting on 3650-FQM at interface level - software verion 16.3.3, please suggest

Philip D'Ath · ‎08-13-2017

I would not run 16.x code unless you really have to. It is very new. I would stick to the more mature 3.7 or 3.6 train.

Leo Laohoo · ‎08-13-2017

I would not run 16.x code unless you really have to.

He doesn't have a choice, Philip. FQM requires a minimum of 16.3.1.

Bad luck, I guess.

Philip D'Ath · ‎08-12-2017

If you want to disable it I think the command is something like "nmsp attachment suppress". I think this might have to be applied at the interface level.

Leo Laohoo · ‎08-13-2017

IP Device Tracking needs to be enabled globally and at the interface level.

The minimum lines of configuration needed are the following:

Globaly: ip device tracking
Interface-level: ip device tracking max <ANY NUMBER HIGHER THAN 0>

To disable IP Device Tracking, use the global command "no ip device tracking" and remove the interface-level command.