×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Radius Authentication

Unanswered Question
Nov 9th, 2000
User Badges:

I have set up VPN3000 concentrator with external authentication configured using funk radius server but unable to authenticate with no specific error message. Do I need to set up a user withing the concentrator as a member of the RADIUS(external) group and also set up the same user on the RADIUS server. This seems the only way I could get the user to connect. Internally configured user works great.

Thnak you.

Nojeem Magbade

Sr. Counsultant


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
b.speltz Fri, 11/17/2000 - 11:08
User Badges:
  • Bronze, 100 points or more

It sounds like you have radius configured already from the Configuration/System/Servers/Authentication/Add or Modify RADIUS screen. The rest of the work that needs to be done is on the client side which isn’t as easy. I’d take a look at http://www.cisco.com/warp/customer/471/radius_tips.html to help out on the client config. The internal server only supports 100 users/groups combined so it’s not very scalable. Besides, you’d have to enter everything twice which defeats the purpose.

Actions

This Discussion