×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

W2K-Build-In Client VPN Connection with C3620

Unanswered Question
Feb 26th, 2001
User Badges:

Hello Everbody!

Has one of you already tried to set up a VPN Connection between the Windwows 2000 IPSec-Client and a Cisco 3620 Router running IOS Ver. 12.1.5?

I do have some problems! ISAKMP is working well but the IPSec SA is not being set up!

Might be the wrong IPSec-Transform-Set ? (esp-des esp-md5-hmac).

Does anyone have a clue for me ?

Thanks!

Mike


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
thomas.chen Thu, 03/01/2001 - 15:03
User Badges:
  • Silver, 250 points or more

After reading your post it looks like you’ll need the new Windows 2000 VPN Client from Cisco. I read another post that says it should be out sometime in March. Does anyone know if the built-in client in Windows works?

michael.gessner Mon, 03/05/2001 - 03:09
User Badges:

Dear Thomas!

I found a solution for the built in IPSec-Client.

With great help from Yoshua McCloud /Cisco!

If you need the config, send me your e-mail address and I can mail it to you!

Mike


tawye Fri, 03/02/2001 - 02:52
User Badges:

Hi, I got this working (IPSEC DEC) on 12.1.6 without problem. Could not get it to work with L2TP at the same time though.

Is NAT being performed anywhere ? If so this will cause problems. You could try using the transform ESP-DES without any MD5-Hash.

Also check what the Windows 2000 error log shows in mmc/computer management/system tools/event viewer/system.

Actions

This Discussion