07-12-2001 03:35 AM - edited 03-12-2019 11:56 AM
I have 2x2610 with 4xE&M. The voice quality is good, no problem but, a call can be up like 5 minutes and i hear the other side but the other side dont hear me. If there's 3 or 4 calls they last each between 30s and 2m long. Any sugestion? The CO are ALCATEL
Thanks
07-23-2001 06:47 AM
This can be tricky to isolate so you might want to debug with Ciscos tac. I would start by checking that you have QoS set up properly to prioritize your voice packets and fragment other large packets (like file transfers, etc.).
10-30-2001 04:33 PM
Calls dropping after certain lengths of time usaually indicate clocking issues. Take a look at your clock/dce settings and make sure they match.
10-31-2001 02:34 AM
Thanks for the reply.
The curious thing is that when a router goes off power, after the on power the problem maintains for a week. After that it works fine. What i need is to keep both routers on power. But is strange!!
Best regards!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide