Calling Pilot Point Not Always Working

Unanswered Question
Jul 18th, 2001
User Badges:

Intermittently, the Pilot point can't be reached by some IP Phones. Periodically, some users forward their phone to the receptionist using the Pilot Point extention. They can forward to the operator using one of the "real" extentions but that isn't good since those extentions will get a busy signal if they are in use. The Pilot Point should not get a busy unless all the extentions are busy. When we experience the problem, we call and hear a continuous ring but the phone associated with the Pilot Point never rings. As far as I know outside callers are not having the problem but it's possible that they are too. Is anyone else having this problem?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ciscomoderator Wed, 08/01/2001 - 03:19
User Badges:
  • Gold, 750 points or more

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center ( or speak with a TAC engineer. You can open a TAC case online at

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.


This Discussion