×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Device Loads for IP phones

Unanswered Question

greetings,


I am attempting to upgrade the IP phone device loads.

Currently my configuration is;

CCM 3.0(8)

7910 phones - P004v301

7940 phones - P003v301

7960 phones - P003v301

The problem I am having is the device loads I am finding are requiring CCM 3.0(11) or CCM 3.11 not

3.0(8).

The Cisco whitepapers state that after I copy the *.bin files to the TFTPPath I can update phones selectivly... (spell checker? ) can anyone confirm that ??

Rick

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mimckee Tue, 10/09/2001 - 20:32
User Badges:
  • Cisco Employee,

Any load for 3.0 should work on 3.0(8). You cannot use a 3.1(1) load with 3.0(x) of call manager and vice versa. So you cannot use 3.0 load with 3.1(1) of call manager. Other than that you should be okay.


Thank you,

Actions

This Discussion