×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

vpnclient - pix - 3000concentrator

Unanswered Question
Oct 26th, 2001
User Badges:

After upgrading the pix to ver 6.0(1) the ciscoclient cannot establish the tunnel to the concentrator. The concentrators public i/f was then moved from the dmz to the pix's outside i/f, this action made the clients work again.

Any clue why it doesn't work on the dmz ???

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
r-simpson Thu, 11/01/2001 - 06:52
User Badges:

Compare your before and after configurations. It sounds like something changed after the upgrade.

Fredric Nilsson Thu, 11/01/2001 - 11:34
User Badges:

Hi!


Can you describe how your networktopology is now and before?



Regards

Fredric


mamarcus Tue, 11/06/2001 - 23:04
User Badges:

Hi.


The networktopology is not changed at all, only the

pix software was upgraded from 5.x to 6.0(1).

The vpn concentrators version is 3.0.3.A


Regards

Mats

joels Fri, 11/02/2001 - 08:08
User Badges:

What version is your concentrator ? Can you try the VPN Group in the concentrator with IPSec thru NAT turned on ?

Actions

This Discussion