10-26-2001 05:16 AM - edited 02-20-2020 09:53 PM
After upgrading the pix to ver 6.0(1) the ciscoclient cannot establish the tunnel to the concentrator. The concentrators public i/f was then moved from the dmz to the pix's outside i/f, this action made the clients work again.
Any clue why it doesn't work on the dmz ???
11-01-2001 06:52 AM
Compare your before and after configurations. It sounds like something changed after the upgrade.
11-01-2001 11:34 AM
Hi!
Can you describe how your networktopology is now and before?
Regards
Fredric
11-06-2001 11:04 PM
Hi.
The networktopology is not changed at all, only the
pix software was upgraded from 5.x to 6.0(1).
The vpn concentrators version is 3.0.3.A
Mats
11-02-2001 08:08 AM
What version is your concentrator ? Can you try the VPN Group in the concentrator with IPSec thru NAT turned on ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
