10-29-2001 01:10 PM - edited 03-01-2019 07:07 PM
Can you bond/aggregate ISDN lines. For example take 3 ISDN lines and get a complete 384K pipe. Can this be done with a Cisco 2600/3600 with a NM-4B-U or a NM-8B-U ?
Thanks
10-30-2001 12:01 AM
Hi,
You can combine multiple ISDN b-channel by using dialer profile together with ppp multilink.
cheers!
11-15-2001 11:01 AM
i need to bond two ISDN lines on two WIC ISDN cards (1750) dialing to a remote site( 2610 with 4 port ISDN NM) can you give me a sample config for this kind of a setup....
Thanks
12-02-2001 10:42 PM
!
interface BRI0/0
description ISDN LINE
no ip address
no ip directed-broadcast
encapsulation ppp
dialer rotary-group 1
isdn switch-type basic-ni
isdn spid1 (SPIDS)
isdn spid2 (SPIDS)
no cdp enable
!
interface BRI0/1
description ISDN LINE
no ip address
no ip directed-broadcast
encapsulation ppp
dialer rotary-group 1
isdn switch-type basic-ni
isdn spid1 (SPIDS)
isdn spid2 (SPIDS)
no cdp enable
!
interface Dialer1
ip unnumbered Ethernet0/0
no ip directed-broadcast
encapsulation ppp
no ip split-horizon
dialer in-band
dialer idle-timeout 2147483
dialer string Phone number to Main Router
dialer string
dialer string
dialer string
dialer load-threshold 1 either
dialer-group 1
no cdp enable
ppp authentication chap
ppp chap hostname (USERNAME if AUTH)
ppp chap password (CHAP PASSWORD)
ppp multilink
12-05-2001 03:40 PM
what about if you want to bond two PRI (T1) lines together? Looking to do this on a 3660 with 2 PRI cards w/CSU/DSU to a 7500 with a multiport PRI w/CSU/DSU.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: