Lucent MAX 6000 with Cisco Gatekeepr

Unanswered Question
Oct 30th, 2001
User Badges:

I have an exsisting Lucent MAX 6000 VoIP gateways and would like to integrate a Cisco IOS based Gatekeeper and ATA 186 IP end points.

Is this possible?

Will I only be able to use H.323 or can I still implement SIP?

Thank you in advance for your input.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ciscomoderator Sun, 11/04/2001 - 19:27
User Badges:
  • Gold, 750 points or more

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources at the online You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.


This Discussion