×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Two ASCII terminal talking with each other through IP NETWORK

Unanswered Question
Dec 10th, 2001
User Badges:

Is it possible to connect two ASCII Terminal such;


Terminal+Router --(IP Network)-- Router+Terminal


Terminals are connnected via ASYNC Serial line.


And if so, how do you configure routers such that; Terminals can talk to each other through a TERMINAL EMULATION Program such as HYPERTERMINAL.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
wrsteve Mon, 12/10/2001 - 05:32
User Badges:

We have used a serial tunnel interface in the past. It works, but if you have a line give you problems the tunnel is sensitive and will go down. The interfaces have to be reset on both ends to bring it back up. A better way is a device to convert serial to ip:


http://www.lantronix.com/products/xds/mss100/index.html

Actions

This Discussion