×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Telnet to PIX through VPN

Unanswered Question

I have a VPN set up between our Netscreen-10 and a PIX firewall. The VPN is working fine (i can see every device on the other side of the pix), however I cannot see the internal interface of the pix. I would like to be able to telnet to and ping the internal address from the other side of the vpn. How can I do this?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
a-vazquez Fri, 01/25/2002 - 14:05
User Badges:
  • Silver, 250 points or more

The only way to do this is to telnet to a server or router internally through the VPN and then telnet back to the inside interface of the PIX.

stbob Tue, 01/29/2002 - 12:55
User Badges:

Since most of my firewall installations have involved a switch on the inside, I usually write a script to telnet first to the switch inside the firewall and then back to the firewall.

tmellen Tue, 03/12/2002 - 10:48
User Badges:

Another option would be to SSH into the pix from outside of your tunnel.

Actions

This Discussion