01-21-2002 11:48 AM - edited 02-21-2020 11:34 AM
I have a VPN set up between our Netscreen-10 and a PIX firewall. The VPN is working fine (i can see every device on the other side of the pix), however I cannot see the internal interface of the pix. I would like to be able to telnet to and ping the internal address from the other side of the vpn. How can I do this?
01-25-2002 02:05 PM
The only way to do this is to telnet to a server or router internally through the VPN and then telnet back to the inside interface of the PIX.
01-29-2002 12:55 PM
Since most of my firewall installations have involved a switch on the inside, I usually write a script to telnet first to the switch inside the firewall and then back to the firewall.
03-12-2002 10:48 AM
Another option would be to SSH into the pix from outside of your tunnel.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: