×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

ACL to allow SNMP

Unanswered Question
scarothe Thu, 03/14/2002 - 08:40
User Badges:

Greetings:


If the SNMP packet filter is in the "heading to" direction, you might look like this.


access-list 100 permit udp host 10.32.0.246 172.23.0.0 0.0.255.255 eq snmp


If it is the port of the source on the return leg, it might look like this.


access-list 100 permit udp host 10.96.0.246 eq snmp 172.23.0.0 255.255.0.0



Thanks...Steve

langej Sun, 03/17/2002 - 23:20
User Badges:

access-list 61 permit

access-list 61 permit


snmp-server community public RO 61

snmp-server community private RW 61


!where 61 is just an access-list number

This should fix the problem

langej Sun, 03/17/2002 - 23:20
User Badges:

access-list 61 permit

access-list 61 permit


snmp-server community public RO 61

snmp-server community private RW 61


!where 61 is just an access-list number

This should fix the problem

Actions

This Discussion