Translation Pattern

Unanswered Question
Mar 20th, 2002
User Badges:

I finally downloaded 12.2XN and made my Vg200 work with mgcp using 1 E1 pri with 30 channels with 100 dns assigned from my PTT.

the number is 8112000 up to 8112099.

My question is :

If I assign 4 digit DNs from 2000 to 2099 what translation pattern should I use to make incoming calls ring to the appropriate phone? (PTT's DID works for the last 3 digits)

Or else if I use 3 digit DNs from 100 to 199?

Thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
cparvex Wed, 03/20/2002 - 05:05
User Badges:

Hi, maybe try to use tech-prefix command

on the gateway, give me your feedback if it works.


mharitos Thu, 03/21/2002 - 00:44
User Badges:

As far as I know tech-prefix works only with voip dial peers. Since I'm using mgcp all call handling is processed only through ccm.


This Discussion