×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Duplicate address mess

Unanswered Question
Apr 25th, 2002
User Badges:

i have a situation with 2 overlapping networks that need to communicate using a 1720 with one ethernet interface e0 192.9.200.18 255.255.255.240 the station that needs to join the network is 192.9.200.30 255.255.255.0 which is already in use on another router interface that is part of the network. There is a station that needs to send to .30 over the WAN with the address of 192.9.200.2 255.255.255.0, none of these addresses can be changed yet. Is there a solution for this mess. Any help would be appreciated.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
stefanb Thu, 04/25/2002 - 15:34
User Badges:

You can NAT the host address to something else and use static host routes. Just make sure that every particpating device knows if they talk to that host or that router's interface. You have to resolve conflicts.

Actions

This Discussion