×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco 1605-R, PPPOE, DDR, Idle-Timeout, IOS 12.2.8T

Unanswered Question
May 6th, 2002
User Badges:

I have configured a 1605-R box (IOS 12.2.8T1) to establish a PPPOE session to Deutsche Telekom (German Carrier) via T-DSL . Everything is working fine, but I miss two essential Features because my ISP ISP charges are based on the amount of time:

1. Dial-on-Demand Routing

2. Dialer Idle-Timeout


Dial-on-Demand Routing for PPPoE Client is implemented in the Cisco 8xx and SOHO77/78:


http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/827/827rlnts/820feat.htm#xtocid40


No I have two questions:

1. Are there any plans to implement the two functions described above for the 1605-R box?

2. What is the the right way to place an official order/wish to Cisco to implement this functions?


Thanks


Dirk

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ciscomoderator Fri, 05/10/2002 - 13:33
User Badges:
  • Gold, 750 points or more

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen


If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.


Actions

This Discussion