×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

cip to host

Unanswered Question
May 26th, 2002
User Badges:

My 390 host connected with two cip card,Can I define the virtual mac of two cip as same,So I can implemted load balance. Like this:

interface Channel1/2

lan TokenRing 0

source-bridge 10 1 755

adapter 0 4000.0755.9026

lan TokenRing 1

source-bridge 10 1 755

adapter 1 4000.0755.9026



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
eligal99 Mon, 05/27/2002 - 01:58
User Badges:

Certainly it is valid to define a duplicate MAC address on 2 separate virtual LAN's. To be on the safe side, I would make the SRB ring-number on the 2nd LAN unique, i.e. change '10' to '11' etc.:


lan TokenRing 1

source-bridge 11 1 755

adapter 1 4000.0755.9026


Obviously you need to define proper CSNA on channel1/0 ans 1/1, and activate the VTAM XCA's pertaining to adapters 0 and 1. All this will let you implemet load balancing...

Eli




Actions

This Discussion