×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
Anonymous (not verified) Mon, 06/24/2002 - 14:38
User Badges:

Use the version and show chassis flash command


Example :


css1# version

Version: ap0410017s (4.10 Build 17) This line shows the

actual IOS running

Flash (Locked): 5.00 Build 2 This line shows the code running the

SCM and SFM that are

saved in memory

Flash (Operational): 5.00 Build 2 This line shows the code for the SCM

and SFM running

Type: PRIMARY This line shows that this box is the

primary if a backup is used you would

see it as secondary

Licensed Cmd Set(s): Standard Feature Set This shows what features are

available with the

Enhanced Feature Set IOS running

__This command shows everything in flash including the code running the SFM

and SCM modules.





css1# show chassis flash

Configuration for CS50:

Name: CS50 SW Version: 4.10 Build 17 This line

shows the actual

IOS running

HW Major Version: 03 HW Minor Version: 0

Serial Number: 21480066695 This line shows the serial number of

the chassis

Base Mac Address: 00-10-58-03-78-94 This line shows the MAC of the

CSS11050

This shows code running This shows the code saved

the SCM and the SFM for the SCM and the SFM

Operational Locked

_5.00 Build 2 5.00 Build 2

The SFM (Switch Fabric module) runs TCP , Spoofing, Load Balancing

The SCM (System Control Module) runs Routing, Management, Data collection,

ARP and other functions related to network layer functions

The code running on these modules cannot be changed unless you change out

the modules themselves. Not upgradeable like the IOS.


Actions

This Discussion