×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

"Warning: no valid "boot system" command. TinyROM will pick an IOS image to boot"

Unanswered Question
Jun 26th, 2002
User Badges:
  • Bronze, 100 points or more

This message is reported in the 805 router when execute the write memory or copy run star config file. How to disable the message?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Anonymous (not verified) Wed, 06/26/2002 - 09:33
User Badges:



It just saying you have not configured a boot system comman in the saved config and

the boot system used would be default.


1. Change the config register setting to 0x2102

2. Configure boot system flash

or boot system flash; if you have more than one image in flash.


do "wr mem" again and see if the problem still occurs.


Its not a performance affecting error, its more informational than warning

and if its still present after above, then its just a cosmetic bug.



Actions

This Discussion