×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

How do I add second T1 to 2650

Unanswered Question
Jun 27th, 2002
User Badges:
  • Bronze, 100 points or more

We are adding a second T1 to our central Location. how do I configure the 2650 for the additional channels ?

The telco is adding channels for second T1 to increase bandwidth to 3mb.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Anonymous (not verified) Thu, 06/27/2002 - 09:30
User Badges:

Sounds like you are using channel-groups;

I assume your initial T1 is configured

this way. Configure the second T1

identically, and enable CEF switching

and we will automatically load balance

acrosss the two T1 links. Or, if you

want both T1's to appear as one bundle,

you can enable MPPP (ppp multilink).


Actions

This Discussion