×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

MCB callback over isdn

Unanswered Question
Jun 28th, 2002
User Badges:
  • Bronze, 100 points or more

how can i conf callback for microsoft 2000 over isdn using 36er Router

can you please give an example.

This is my config but it does not work.

version 12.2

service exec-callback

!

username student callback-dialstring ""

password 0 cisco

!

Interface Dialer2

ip address 10.115.3.2 255.255.255.0

encapsulation ppp

dialer pool 1

dialer remote-name student

peer default ip address pool RASIN

no fair-queue

pulse-time 0

no cdp enable

ppp callback accept

ppp authentication chap

ppp multilink




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Anonymous (not verified) Fri, 06/28/2002 - 14:28
User Badges:

Make sure that you have "aaa authorization

network ppp default local" configured. Enable

the following debug commands to see what

is going on:


debug ppp neg

debug callback

debug ppp cbcp

debug aaa authen

debug aaa author


Otherwise, the config looks fine. Make

sure that you have recent code, as there

were bugs with MS callback in the past.


Actions

This Discussion