×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

I have Cisco 2621 router with two fast Ethernet interfaces, how I can use both interfaces for load sharing and redundancy. for your information I have only one subnet in my lan 172.16.1.0/24?

Unanswered Question
Jun 28th, 2002
User Badges:
  • Bronze, 100 points or more

I have one Cisco 2621 router with two fast Ethernet interfaces, how I can use both interfaces for load sharing and redundancy. for your information I have only one subnet in my lan 172.16.1.0/24?




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Anonymous (not verified) Fri, 06/28/2002 - 14:28
User Badges:

You can assign the same subnet (or

the same address, using IP unnumbered)

to both interfaces, and with CEF

(ip cef) switching or fast switching

enabled you will automatically get

load balancing and redundancy, as

long as both interfaces learn the same

routing updates.


glefebvr@lombard.ca Thu, 07/11/2002 - 07:37
User Badges:

I have a 5509 with a RSM connected to a 3640 via a single link. Could you send me an example to show how to connect the 5509 to the 3640 using two links for load sharing? 2 FastE interfaces connected to 2 switchports?

Any help would be appreciated.


Guy Lefebvre

Lombard Canada

Actions

This Discussion