2600 cannot start up & cannot start from rommon

Unanswered Question
Jul 3rd, 2002
User Badges:

when I start up 2600, It's start Message just as appendix. Then It has no response.

I try to start it from Rommon. I have used deferent PC with deferent Standard Break Key Sequence Combinations. But It has no response to any Break Signal.

What's wrong with it?


APPENDIX:



















































System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info


Testing lower main memory - data equals address

Testing lower main memory - checkerboard

Testing lower main memory - inverse checkerboard

Clearing lower 4K memory for cache initialization

Clearing bss

Reading monitor variables from NVRAM

Enabling interrupts

Enabling instruction cache

Reading cookie

Initializing main memory

Sizing NVRAM

Initializing PCI subsystem

Exiting init

C2600 platform with 32768 Kbytes of main memory


program load complete, entry point: 0x80008000, size: 0x463e98

Stack pointer : 0x02000000

monstack : 0x8000613C

monra : 0x00000000

edata : 0x8000BEA4

magic : 0xFEEDFACE

memsize : 0x02000000

uncomp_size : 0x00B57250

comp_size : 0x0045FFE0

comp_checksum : 0xE2370D1A

uncomp_checksum : 0x030D113A

Self decompressing the image : ################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################ [OK]

Source elf_hdr->e_shnum = 0x0000000A

Setting up to copy ELF section 0x00000001

to image_info section 0x00000000

sh_name = 0x0000001B

sh_type = 0x00000001

sh_flags = 0x00000006

sh_addr = 0x80008000

sh_offset = 0x00000060

sh_size = 0x0085DF64

sh_link = 0x00000000

sh_info = 0x00000000

sh_addralign = 0x00000020

sh_entsize = 0x00000000

Setting up to copy ELF section 0x00000002

to image_info section 0x00000001

sh_name = 0x00000021

sh_type = 0x00000001

sh_flags = 0x00000002

sh_addr = 0x80865F64

sh_offset = 0x0085DFC4

sh_size = 0x002DA1C3

sh_link = 0x00000000

sh_info = 0x00000000

sh_addralign = 0x00000008

sh_entsize = 0x00000000

Setting up to copy ELF section 0x00000003

to image_info section 0x00000002

sh_name = 0x00000029

sh_type = 0x00000001

sh_flags = 0x00000002

sh_addr = 0x80B40127

sh_offset = 0x00B38187

sh_size = 0x00000001

sh_link = 0x00000000

sh_info = 0x00000000

sh_addralign = 0x00000004

sh_entsize = 0x00000000

Setting up to copy ELF section 0x00000004

to image_info section 0x00000003

sh_name = 0x00000031

sh_type = 0x00000001

sh_flags = 0x00000003

sh_addr = 0x80B40128

sh_offset = 0x00B38188

sh_size = 0x0001EED8

sh_link = 0x00000000

sh_info = 0x00000000

sh_addralign = 0x00000008

sh_entsize = 0x00000000

Setting up to copy ELF section 0x00000005

to image_info section 0x00000004

sh_name = 0x00000037

sh_type = 0x00000001

sh_flags = 0x00000003

sh_addr = 0x80B5F000

sh_offset = 0x00B57060

sh_size = 0x00000010

sh_link = 0x00000000

sh_info = 0x00000000

sh_addralign = 0x00000004

sh_entsize = 0x00000004

cpu type : 0x0000002B

uncomp_size : 0x00B57250

monstack : 0x8000613C


image_info.entry_point = 0x80008000

image_info.section_count = 0x00000005

image_info.monstack = 0x8000613C

image_info.monra = 0x00000000

image_info.param0 = 0x00000002

image_info.param1 = 0x00000000

image_info.param2 = 0x00000000

image_info.param3 = 0x00000000

Section Index = 0x00000000

source = 0x80034490

dest = 0x80008000

bytes = 0x0085DF64

Section Index = 0x00000001

source = 0x808923F4

dest = 0x80865F64

bytes = 0x002DA1C3

Section Index = 0x00000002

source = 0x80B6C5B7

dest = 0x80B40127

bytes = 0x00000001

Section Index = 0x00000003

source = 0x80B6C5B8

dest = 0x80B40128

bytes = 0x0001EED8

Section Index = 0x00000004

source = 0x80B8B490

dest = 0x80B5F000

bytes = 0x00000010


Restricted Rights Legend


Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.


cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706




Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-I-M), Version 12.1(2)T, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2000 by cisco Systems, Inc.

Compiled Tue 16-May-00 15:15 by ccai

Image text-base: 0x80008088, data-base: 0x80865F64


cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory.

Processor board ID JAD05071EAP (75069049)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

1 Ethernet/IEEE 802.3 interface(s)

32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)



--- System Configuration Dialog ---


Would you like to enter the initial configuration dialog? [yes/no]:


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bsivasub Thu, 07/04/2002 - 07:24
User Badges:

Does the same console work on any other devices ?

seems that no packets go up the console connection..neither break nor any sequence. I would check the cabling/consoleport issues.


You should use the following URL for break key


http://www.cisco.com/warp/public/701/61.html

Actions

This Discussion