×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

RSM fails to ping all hosts in the same VLAN, but OK after "clear arp"?

Unanswered Question
Jul 3rd, 2002
User Badges:
  • Bronze, 100 points or more

The Catalyst 5500 RSM failed to ping all the hosts in the same vlan (ID is 6), then it is OK after "clear arp" on the RSM, but then failed after some time. The symptom was repeated. it is why?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
yusuff Wed, 07/03/2002 - 23:58
User Badges:
  • Cisco Employee,

something else is ARPing for the hosts you are trying to reach. You have a bridging loop, check layer2 and trace the MAC addresses on the switch.


HTH

R/Yusuf

Actions

This Discussion