×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

How do you configure the ports on an IP phone?

Unanswered Question
Jul 8th, 2002
User Badges:
  • Bronze, 100 points or more

On the IP phone, there are two ports, (port 1 and port2) which can be set. Can these be configured or set other than setting ports on the switch? Are these your PC port / LAN switch port as well and can one be shut down or disabled and have the phone not have issues with functionality?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Anonymous (not verified) Mon, 07/08/2002 - 14:24
User Badges:

You can disable the PC port (the one marked (10/100 PC) from within Call Manager. Simply go to the phone's management page and at the bottem is a drop box for PC Port.

I'm not aware of a way to hard code speed/duplex. The LAN port obviously can't be disabled and will auto sense to however you set the upstream switch.



Actions

This Discussion