×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

x25 over tcp/ip

Unanswered Question
Jul 10th, 2002
User Badges:

HI,


I have a lease line with a x25 over tcp/ip with a cisco router 2500 it's work normaly . But if i replace the C2500 by a cisco router C805 this error i s ocuured with this command : debug x25 all


00:22:06: Serial0: X.25 O R/Inactive Restart (5) 8 lci 0

00:22:06: Cause 7, Diag 0 (Network operational/No additional information)

00:22:06: Serial0: X.25 I R3 Restart (5) 8 lci 0

00:22:06: Cause 0, Diag 255 (DTE originated/Unknown diagnostic)

00:22:06: Serial0: X.25 I R1 Call (13) 8 lci 1

00:22:06: From (0): To (4): 1005

00:22:06: Facilities: (0)

00:22:06: Call User Data (6): 0x30303333 (unknown)

00:22:06: Serial0: X.25 O R1 Clear (5) 8 lci 1

00:22:06: Cause 5, Diag 64 (Network congestion/Call or Clear problem)

00:22:06: Serial0: X.25 I R1 Clear Confirm (3) 8 lci 1

00:22:06: Serial0: X.25 I R1 Call (13) 8 lci 1

00:22:06: From (0): To (4): 1005

00:22:06: Facilities: (0)

00:22:06: Call User Data (6): 0x30303333 (unknown)

00:22:06: Serial0: X.25 O R1 Clear (5) 8 lci 1

00:22:06: Cause 5, Diag 64 (Network congestion/Call or Clear problem)

00:22:07: Serial0: X.25 I R1 Clear Confirm (3) 8 lci 1

00:22:08: %LINK-3-UPDOWN: Interface Serial0, changed state to up

00:22:09: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state

to up

00:22:28: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state

to down

00:22:29: %LINK-3-UPDOWN: Interface Serial0, changed state to down





  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion