×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

PIX to 3030 L2L - No traffic past 3030

Unanswered Question
Jul 11th, 2002
User Badges:

I've configured a L2L tunnel between a PIX 515 and a Cisco 3030 but I'm unable to ping or access anything other than the 3030 interfaces.

The tunnel comes up and looks functional. I referenced http://www.cisco.com/warp/public/471/ALTIGA_pix.html for the config. please help ---Mike

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
edadios Thu, 07/11/2002 - 15:59
User Badges:
  • Silver, 250 points or more

This looks like a routing issue.

Possibly your default gateway settings for host behind the 3030 is not the 3030 privtate interface.

Check if the host behind the 3030 has a route for the subnet behind the pix that is set to be sent to the 3030 privtae interface.

On a windows pc, you can do a route add ....... for the pix private network with gateway of the 3030 private.

Regards,


Actions

This Discussion