cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
555
Views
0
Helpful
1
Replies

static netbios cache entry

lkrucker
Level 1
Level 1

Hello

I have two routers connected over dlsw, each router is connected to a

token ring. If i want to configure a static cache entry, which command sould

i use netbios name-cache ...........

or

dlsw icanreach netbios-name ...........

Thanks for your help

Louis

1 Reply 1

sbales
Level 1
Level 1

NetBios Name-Caching is an older feature which was used in conjunction with RSRB

and Local Acknowledgement. The cache that DLSw+ keeps for NetBios names is a

completely different cache, optimized for DLSw+ operation. By configuring 'dlsw

icanreach netbios-name ...' on a router, it advertises to its peers via capabilities exchange

that it has a route to the NetBios station in question, thereby creating static remote entries

in each of its remote-peers. This is the configuration you will most likely want to use.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: