×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

VPN Concentrator 3030 VCA (Vritual Cluster Agent) - software ver. 3.5.3

Unanswered Question

Hi Guys,


We are running a pair of 3030 Concentratror on the same IP network (Internal and External Interfaces). I have configure the VCA feature (with and without intra-peers encrytion) and the client Load Balancing seems towork for 10/20 minutes and then stops responding.


I looked at the event logs and live log monitor and does not seem to give any errors.


Does these feature work or it is still buggy?


Thanks in advanced


Gonzalo

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paqiu Mon, 07/22/2002 - 17:26
User Badges:

For that NAT with load-balancing. Please make sure following settings:

I assume that we still using following network diagram:

http://www.cisco.com/warp/customer/471/ld_bl_vpn3000_7602.html


So the virtual ip address should be 172.18.124.254 ( will be static translated to 200.200.200.254)

please also config the NAtted ip address for both peers in the concentrator.

I assume one is 200.200.200.1, another 200.200.200.2

So in the PIX, you need three static nat translation.


One more thing, please turn off the proxy-arp in the inside interface of your PIX and give a try.


If it is still not working. please open a TAC case, we will continue help you to do further troublesshooting.


Best Regards,


Actions

This Discussion