×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

VPN - NAT Question

Unanswered Question

I have a remote office that has a DSL connection using PPoE with 1 public IP Address. I've installed a Dlink Di-704 gateway that enables me to have several PC's connected to the internet with 1 IP address. I installed the VPN client on the PC's and they connect to a VPN 3015 here at the corp. office.


My question is:

I want to install a laserjet printer to the 704 using an HP jetdirect print server. The 704 supports NAT, can I NAT the printer so that anyone from the internet can print to th printer located on the inside of the remote office?

Will I have problems because the PC's are using VPN?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
awaheed Wed, 07/17/2002 - 14:38
User Badges:
  • Cisco Employee,

It shouldn't have a problem for you to do the Static NAT for the Printer. Additionally the VPN shouldn;t cause any problems with the NAT if you make sure to bypass the NAT by using Policy Route maps, something similar can be found at: http://www.cisco.com/warp/public/707/ios_D.html


Hope this helps,


Thanks and Regards,

Aamir Waheed,

Cisco Systems, Inc.

CCIE#8933


-=-=-=-

Actions

This Discussion