×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

ip phone call to bri via SRST gw

Unanswered Question
Jul 17th, 2002
User Badges:

My BRI is working if srst gateway has connection to CCM. But if it has none, then i am not able to place call via bri interface located on SRST enabled gateway to PSTN. If i look at debug isdn q931, there i do not see called number item. There is no number, therefore it will not connect me.

My srst gw ios is 12.2.8T5. When i change bri interface with FXS interface, everything is working. Does anybody know why my srst gw does not forward dialed digit via bri interface to PSTN?


Martin



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Markus Schneider Mon, 07/22/2002 - 06:26
User Badges:
  • Cisco Employee,

What does the pots dial-peer configuration look like of the peer that it is using? You may want to try using the 'forward-digits' command to explicitly send digits to the PSTN. Does this only happen when SRS is active, or is this when everything is fine?

Actions

This Discussion