VoiceGateway and PBX CAS signal

Unanswered Question
Aug 1st, 2002
User Badges:

Hi to all,

is it possible to connect a PBX to a gateway through a CAS channel as follow:

PBX1 ---cas---- gw ------ IP ------- gw -------cas ----- PBX2

having a call from channel 20 of PBX1 going to channel 20 of PBX2 ?

If yes, which kind of gateway (2600,3600,as5300) and voice-card are needed?

Regards,

Chris

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mimckee Thu, 08/01/2002 - 10:31
User Badges:
  • Cisco Employee,

I don't see why this would not be possible. You can user any of the router platforms you have mentioned. Depending on the platform you will also need a voice card for the interface to the T1.


Thank you,


-Mckee

Actions

This Discussion