×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Static Command problem

Unanswered Question
Aug 2nd, 2002
User Badges:

Hi!


When I enable a static command to give access to an inside host from outside my connection to the outside drops, My access-list is as follows


access-list 101 permit tcp any any

access-list 101 permit icmp any any

access-list 101 permit ip 10.101.3.0 255.255.255.0 66.153.9x.0 255.255.255.240


Static (inside,outside) 66.153.9x .x 10.101.1.54 netmask 255.255.255.255 0 0

access-group 101 in interface outside


Where could be the problem.. Can somebody help


Regards


Anair

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion