×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

How to configure SLB client NAT when server & client in same subnet

Unanswered Question
Aug 4th, 2002
User Badges:

HI,


I'm trying to find documentation on how to configure SLB client NAT when server & client in same subnet ie..


VIP = 172.22.3.80

Real = 172.22.16.205

Clients = 172.22.16.1 to 172.22.23.254 /20


Any help appreciated.


BernieM

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
beth-martin Tue, 08/13/2002 - 07:27
User Badges:
  • Bronze, 100 points or more

You will run into a lot of issues trying to do it this way, among them the lack of an established connection state. Much better to readdress somewhere.

kschung Thu, 08/15/2002 - 11:45
User Badges:

Applying client NAT to force the return traffic back to the load balancer is commonly done. The only issue is that all your clients look like one ip address from the server perspective.


kevin


Actions

This Discussion