×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

SN5428 and Zoning ????

Unanswered Question
Aug 8th, 2002
User Badges:

hello,


I'am actually building a storage network with 2 SN5428, 1 IBM FastT500 and 4 servers. 2 servers serve as files servers (win 2000) and 2 serve to control the robots backup (AIX).

so do do that i need the zoning in the SN5428 (besause AIX must see all the disk of the FastT500 for the replication), and it's the case since the software release 2.3.1-K9, but i have some difficulties to parameters the zoning.

It seems that the zoning is on the all FC connector or none, but impossible to choose for witch FC individualy, and it's my problem.


-if i put the zoning on all the FC, my wink server discover all the discs of the FastT500 (even the 2 controllers) and it's a point of failure for my SAN (everybody whitch acces the servers can mount a device to store data)

-if the zoning is desactivated, my AIX can't see the discs and my servers 2k lost their lun.


so, i'am blocked and i don't know the solution


anybody can help me and tell me how i can configure the zoning for each FC (if it's possible with the version 2.3.1-K9) or how to cache the discs in my servers 2k???????


best regards

David PALLOIS

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dpallois Mon, 08/26/2002 - 23:16
User Badges:

thanks for your reply


in fact, my question was a false problem.

these switchs work very well and i had resolved my problems.

for information, the difficulties came with the veritas softwares on windows 2000


best regards

David

Actions

This Discussion

 

 

Trending Topics: Storage Networking