Erick, thanks for the help.
Here is a show version, the show command only works from the en, and not after config t is entered. How can i get rid of the "image" looks like script at the end of the config appears to be what i thought was the image.
PacBellRouter#show config
Using 1690 out of 29688 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname PacBellRouter
!
enable secret 5 XXXXXXXXXX
enable password XXXXXXXXX
!
ip subnet-zero
!
modemcap entry line
!
!
!
interface FastEthernet0
description TO LOCAL LAN
ip address 192.168.100.2 255.255.255.0
ip nat inside
speed auto
!
interface Serial0
description PB CKT 40HCGS991156_OO1PT
ip address 64.160.180.38 255.255.255.240
ip nat outside
encapsulation ppp
no fair-queue
service-module t1 timeslots 1-24
!
ip nat pool webaccess 209.76.153.161 209.76.153.174 netmask 255.255.255.240
ip nat inside source list 1 pool webaccess
ip classless
ip route 0.0.0.0 0.0.0.0 64.160.180.37
no ip http server
!
!
access-list 1 permit 192.168.100.0 0.0.0.255
banner motd ^CC
East Bay Restaurant Supply
This system is for authorized use only. Individuals using this
computer system without authority, or in excess of their
authority, are subject to having all of their activities on this
system monitored and recorded by system personnel. In the course
of monitoring individuals improperly using this system, or in the
course of system maintenance, the activities of authorized users
may be monitored, Anyone using this system expressly consents to
such monitoring and is advised that if such monitoring reveals
possible evidence of criminal activity, system personnel may
provide evidence of such monitoring to law enforcement officials.
^C
!
line con 0
password XXXXXXX
line aux 0
exec-timeout 300 0
password XXXXX
login
modem InOut
flowcontrol hardware
line vty 0 4
password XXXXXXX
login
!
end
PacBellRouter#
