cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
704
Views
0
Helpful
1
Replies

Cant get 3rd interface to be seen on PIX 515

stownsend
Level 2
Level 2

Here is the info from Sh Ver

Hardware: PIX-515, 32 MB RAM, CPU Pentium 200 MHz

Flash i28F640J5 @ 0x300, 16MB

BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0: address is 0050.54fe.ef68, irq 10

1: ethernet1: address is 0050.54fe.ef69, irq 7

Licensed Features:

Failover: Disabled

VPN-DES: Enabled

VPN-3DES: Disabled

Maximum Interfaces: 3

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

IKE peers: Unlimited

Serial Number: 403480639 (0x180ca03f)

Its as though the Card is not installed. Its in there. Does it matter what slot it is in??

Thanks,

Scott<-

1 Reply 1

steve.barlow
Level 7
Level 7

Did you install it in the top slot? If no, place it there. It's not a gig card is it - they aren't supported in 515s.

Steve

Review Cisco Networking products for a $25 gift card