×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Echo-Cancleation on PRI with MGCP PRI Backhauling

Unanswered Question
Sep 14th, 2002
User Badges:
  • Bronze, 100 points or more

Hi,


I have a PRI with MGCP enabled (Pribackhauling) 12.2.11T, 3640, and I have to keep putting the "echo-cancel coverage 16" under the voice port, when I reload the router, the mgcp removes this configuration, I cannot locate this in Call Manager to enable it, does anyone know a workaround?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
trailman73 Sun, 09/15/2002 - 07:45
User Badges:
  • Bronze, 100 points or more

You have to do a shut, no shut on the voice port. If you don't it will not save the config.


geoff

tringwelski_2 Wed, 10/09/2002 - 09:06
User Badges:
  • Bronze, 100 points or more

This is a bug in the code if your using the config paramater and auto d/l the commands, the echo coverage is removed each time, so do not use the auto config /parcing of the cli , manually enter the info and remove the server config command.

Actions

This Discussion