×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Fixup pc anywhere, ports 5231 out, 5232 in

Unanswered Question
Sep 29th, 2002
User Badges:

Would I only fixup the incoming port or because PC anywhere calls out on one port and recieves an answer on another port. Do I have to Fixup both?? Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Sorry but there is no fixup protocol for pc anywhere. This link will help you to determine which fixup protocols are available.

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/df.htm#xtocid12


You would have to create access-lists or conduits, depending on your version and or preference to allow access to your PC via PCanywhere. As a word of caution be very careful when doing this. If your PC is behind the "inside" interface and you open up a conduit to this device you are giving anyone that can access it full security rights, (sec100) to be able to access other interfaces off of the PIX. If you are going to create the access to the PC via PC anywhere make sure it is in a DMZ and make sure access from this PC has restricted access to the inside of your network for safety.


Kim

bs0000554 Mon, 09/30/2002 - 17:14
User Badges:

we (users) cant construct conditional access (fixups)

Actions

This Discussion